Pressure Switch - MP10
1. Simple installation, plug-in port or thread-in fitting.
2. Compact size : 26×10×10.4 mm.
3. Setting pressure range : Vacuum ( 0 ~ －101.3 kPa ), Positive ( 0 ~ 0.6 MPa )
4. Low cost.
Specifications
| Dimensions | 26×10×10.4 mm |
|---|---|
| Operating / Setting pressure range | Vacuum : 0 ~ －101.3 kPa, Positive : 0 ~ 0.6 MPa |
| Medium | Air, Non-corrosive / Non-flammable gas |
| Proof pressure | Vacuum : 0.6 MPa, Positive : 1.5 MPa |
| Response time | Approx. 1ms |
| Current consumption | 10mA max. |
| Sensor type | NPN or PNP |
| Output short circuit protection | Yes |
| Setting method | Adjusting by VR |
| Indicator | Red LED turns ON |
| Enclosure | IP 40 |
| Ambient temp. range | Operation : 0 ~ 60℃, storage : －20 ~70℃ ( No condensation or freezing ) |
| Ambient humidity range | Operation / Storage : 35 ~ 85% RH ( No condensation ) |
| Vibration | Total amplitude 1.5mm, 10Hz-55Hz-10Hz scan for 1 minute, two hours each direction of X, Y and Y |
| Shock | 980m/s2 ( 100G ),3 times each in direction of X,Y and Z |
| Piping method | Push-in tube or thread-in |
| Lead wire | Oil-resistance cable, 3 wires ( 0.18mm2 ), φ2.6mm |
| Weight | Approx. 50 g ( with 3-meter lead wire ) |
Online Inquiry