Specifications
| Wiring method | RDGV : 2 wire, RNGV,RPGV : 3 wire |
|---|---|
| Switching logic | Solid state output, N.O. |
| Switch type | NPN current sinking (RNGV), PNP current sourcing (RPGV) |
| Operating voltage | RDGV : 10~28V DC, RNGV, RPGV : 4.5~28V DC |
| Switching current | RDGV : 4~20mA max. RNGV, RPGV : 50mA max. |
| Switching rating | RDGV : 0.6W max. RNGV, RPGV : 1.5W max. (※1) |
| Current consumption | RNGV, RPGV : 10mA @24V DC max |
| Voltage drop | RDGV : 3.5V max. RNGV, RPGV : 0.5V @ 50mA max. |
| Leakage current | RDGV : 0.8mA max. RNGV, RPGV : 0.01mA max. |
| Indicat | Red LED |
| Cable | RDGV : φ2.6,2C, PVC, RNGV, RPGV : φ2.6,3C, PVC |
| Operating Frequency | 1000 Hz |
| Temperature range | －10℃~＋70℃ ( No freezing ) |
| Shock | 50G (※2) |
| Vibration | 9G (※3) |
| Enclosure classification | IEC 60529 IP67 |
| Protection circuit | RDGV : 4, RNGV, RPGV : 3,4 (※4) |
| Weight | 23 g ( 2m Cable ) |
| Remark | ※1 : Warning: Never exceed rating ( watt = voltage × amperage ). Permanent damage to sensor will occur. ※2 : Sin wave / X.Y.Z. 3 directions / 3 times each direction / 11ms each time. ※3 : Double amplitude 1.5mm / 10Hz~55Hz~10Hz(Sweep 1min) / X.Y.Z. 3 directions / 1 hour each time. ※4 : 1=None / 2=Short-circuit / 3=Power source reverse polarity / 4=Surge suppression. |
Online Inquiry